Lymington · New Forest · Hampshire & Dorset
PAT testing
In-service inspection and testing of electrical equipment for offices, shops, workshops, holiday lets and rented homes. Every item is inspected, tested, labelled and recorded, and you get a clear register and certificate to show your insurer, landlord or fire risk assessor.
Why it matters
The Electricity at Work Regulations 1989 require electrical equipment used at work to be maintained so it's safe, and the Provision and Use of Work Equipment Regulations 1998 say much the same. Landlords and holiday-let owners have a duty to make sure the appliances they provide are safe too.
The law doesn't set a fixed interval. How often equipment needs checking depends on what it is and where it's used: a kettle in a busy kitchen or a drill on site needs more attention than a monitor on a desk. We'll suggest sensible intervals for each item, following the IET Code of Practice.
What you get
- Inspection and testing to the IET Code of Practice for In-service Inspection and Testing of Electrical Equipment, with calibrated test instruments
- A pass / fail label on every item, with its ID and next test date – scan its QR code with any phone to see the latest result
- An equipment register and certificate, with any failed items and what to do about them
- Your equipment, results and certificates online in your Flowenergi account, any time
- A reminder when items are next due, so nothing slips
Prices
Pay the way that suits you
Pay per item, book a half day or full day for larger sites, or pick a fixed-price package. We'll tell you which works out cheapest when you book.
Per item
Charged on the number of items actually inspected and tested, plus one visit charge. Ideal when you know roughly how much equipment you have.
| Combined inspection & test Formal visual inspection and electrical tests – earth continuity, insulation resistance or leakage current, and polarity on leads – with a pass / fail label on every item. | £3.50 per item |
| Formal visual inspection only For lower-risk equipment between combined tests, as the IET Code of Practice allows. Labelled and recorded the same way. | £1.50 per item |
| Visit charge Covers travel and setting up, once per visit. It's also the minimum charge for a visit. | £80 per visit |
We're not VAT registered, so there's no VAT to add.
Prices are for equipment at a single address, within about 20 miles of Lymington. Further afield? Ask – we can usually group visits to keep the cost down.
Rough estimate
Enter roughly how many items you have – anything with a plug, plus extension leads and IEC (kettle-type) leads, which count as items too.
A guide only: per-item prices are charged on the items actually tested on the day. We're not VAT registered, so there's no VAT to add.
How it works
From booking to certificate
Book
Tell us roughly what you have and when suits you. We'll work around your opening hours so there's as little disruption as possible.
Inspect & test
Each item is checked for damage, then tested. Most items are only unplugged for a minute or two, so you can keep working.
Fix or flag
Blown fuses and damaged plugs are replaced on the spot where we can. Anything unsafe is labelled as failed and taken out of use, with a note of why.
Records & reminders
You get the register and certificate by email and in your online account, and a reminder before items are next due.
Qualified to do it. Testing is carried out by Ben Cox, who holds the EAL Level 3 Award in In-Service Inspection and Testing of Electrical Equipment alongside BS 7671 and periodic inspection qualifications. More about us.